RØDELink represents a range of digital wireless systems. Using a Series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8″ thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE has included an omnidirectional lavalier microphone in the kit to provide the highest possible audio reproduction quality.
Specification :
| Parameter | Value |
|---|---|
| Transmission Type | 2.4GHz Fixed Frequency Agile System |
| System Dynamic Range | 112 dB |
| Range (Distance) | Up to 100m |
| Frequency Range | 35Hz - 22kHz |
| Maximum Output Level | 1v Rms (2.8v P-p) |
| Maximum Input Signal Level | 1v Rms (2.8v P-p) |
| Maximum Latency | 4ms |
| Power Source | 2 X AA Battery Or MicroUSB |
| Antenna | Internal |
| Output Connection | RX-CAM - 3.5mm TRS Locking Jack Socket - Dual Mono |
| Input Connection | TX-BELT - 3.5mm TRS Locking Jack Socket |
| Output Impedance | RX-CAM - 300Ω RØDELink LAV - 3k Ω Typical |
| Input Impedance | 10kΩ |
| Acoustic Principle | Permanently Polarised Condenser |
| Polar Pattern | Omni-directional |
| Frequency Range | 20Hz – 20kHz |
| Maximum SPL | 110 dB SPL (@ 1kHz, 1% THD into 1Ω load) |
| Sensitivity | -33.5db re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2dB @ 1kHz |
| Signal-to-noise Ratio | 67 dB |
| Equivalent Noise (A-Weighted) | 27 dB Typical |
| Dynamic Range | 83 dB Typical |
Reviews
There are no reviews yet.